Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9029252

- Product Categories
- Friendly Links
Information Name: | Supplies Sika Lan Skaln volatile anti-rust oil replacement Sika Lan anti-rust oil |
Published: | 2012-08-08 |
Validity: | 30 |
Specifications: | |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | Sika Lan volatile anti-rust oil: Contact: tanggo Tel: 18221268629 QQ: 1522126747 The low viscosity penetration and anti-rust oil, mineral base oils, fatty acids, additives and solvent refined, with good penetration properties, lubricating properties, and the rust loose capacity. Scope of application: A military leaf spring and the other is not easy to take over the area, mainly used to reduce wear and noise. 2 for loosening rusty nuts, bolts and screw. 3, can use a brush or spray application. 4, not for the spring with a rubber or felt between the lining. Environment: health and safety This product comes with the the Si Kalan material safety data sheet (MSDS) and Si Kalan user security guide. Should be in accordance with the provisions of the steps and follow the relevant laws and regulations of use and sewage. Features: Protection is difficult to tap into the area: Applied on the metal surface after the solvent of the lubricating oil and fatty acid additives conveying to the gap, and rusty, the solvent does not evaporate before the trade under a layer of lubricant film on the metal surface to prevent friction surface wear. Fat with good rust-proof special oil, can prevent the emergence of new rust. Elimination of noise: The ability to penetrate the strong, the use of lubricants into the small space and enough to form a thick lubricating film, thus reducing wear and tear prior to the moving parts, eliminating the noise. Rusty nuts easier to loose: The ability to penetrate the strong to allow lubricant to pass through the rust layer of rust, loosening rusty nuts, bolts and screw it easier, less time and effort. Important parameters: Skaln ensis oil Flash point COC, ℃ 70 Pour point, ℃ -33 Solvent mass content,% 60 Viscosity, the MM2 / s @ 40 ℃ 6.9 |
Admin>>>
You are the 9872 visitor
Copyright © GuangDong ICP No. 10089450, Pine line Trade Development Corporation All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 9872 visitor
Copyright © GuangDong ICP No. 10089450, Pine line Trade Development Corporation All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility