Si Kalan - Adams Knight class guide oil: 

 High-quality machine tool slide lubrication. Depth of refined mineral base oils, extreme pressure additives by sticky (adhesive) agent, antifriction agent and rust and corrosion corrosion resistant refined. 



 Scope of application: 

 Machine rails, rail 

 The level of rails (ISO 68) 

 Light to medium-sized on the use of occasions (ISO68) 

 Vertical rails (ISO 220) 

 Worse occasions (ISO 220) 

 · Applies Bijurr lubrication bright agent release system 

 ? Other requirements of the adhesion is strong, non-corrosive extreme pressure lubricant and industrial applications. 



 Performance criteria: 

 · Cincinnati Milacron standard P-47: the heavy rail lubricants (ISO 68) 

 · Cincinnati Milacron standard P-50: heavy rail lubricants (ISO 220) 



 Features: 

 Smooth, vibration-free running: This product contains a special anti-friction agent, lubricity, reduce friction and drag, to prevent stick-slip movement and the machine are summarized action and thus improve the surface finish of the machining. 

 To improve positioning accuracy: a special reduction of the thickening agent of the Mount agent makes this product can form a thick layer of high-strength film, thus ensuring the accuracy of the positioning of the tool plate to prevent the wear and tear of the system prepared parts. 

 Reducing failures: This product contains special extreme pressure additives, can form an effective protective film even under heavy loads, in order to prevent the rails and rail scratch. Effective rust corrosion inhibitors to protect the machine components does not rust, corrosion. 

 · To reduce the loss of lubricant: This product contains a special thickening agent, to prevent the lubricant from the lubrication surface, especially from the loss of the vertical slide surface In addition, this product good adhesion, high strength lubricating film, even in heavy load not easily be squeezed out in the fuel rail will not be cutting and emulsifying wash away. 



 Important parameters: 

 ISO level for the 
 32 
 68 
 220 

 Copper Strip Corrosion, 3 hours @ 100 ℃ 
 1a 
 1 a 
 1 a 

 Flash Point, COC 
 205 
 216 
 234 

 Pour point, ℃ 
 -30 
 -27 
 15 

 Viscosity, ° C 




 Mm2 / s @ 40 ℃ 
 32.5 
 64.6 
 210 

 Mm2 / s @ 100 ℃ 
 5.43 
 8.8 
 19.4 

 Viscosity index 
 112 
 110 
 105