Aquatek Cutting oil 

 Sri Lanka crack oil-based cutting oil: 
 Transparent, light-colored fog of active sulfur series of cutting oil, suitable for medium to heavy machining. This product has a number of extreme pressure (EP) and the viscosity grade, the fat content of oil is not the same to meet the requirements of the different metals, different types of machining. 

 Scope of application: 

 ★ medium to heavy machining hard and brittle gold and other materials from the soft and ductile metal. 

 ★ Transtultex A (low viscosity): Requires the use of low viscosity cutting oil drilling deep holes, grinding and other machining. 

 ★ Transtultex D (fat-free oil): no specific requirements for surface finish machining, or fat-containing products can cause grinding of the grinding wheel adhesion. 

 ★ tanstultex F: very difficult machining surface finish requirements, especially suitable for forming the grinding and machining performance index is very low metal alloy drill deep hole machining operations. 

 ★ Transtultex H (extreme pressure to the highest performance): for the most demanding machining and the most difficult processing, processing of metals and alloys. 

 Can not be used for processing requires no stains of copper and its alloys, and this case, to selected Aquatex and Cleartex priority. 

 , The preferred option for the following reasons can not use chlorine products machining 1 "ransultex CF: chlorine products will stress crack; processing occur with chlorinated products of the chemical reaction of the metal: chlorine products sewage more difficult. 

 Important performance parameters 

 Transultex 

 Level 
 L 

 Flash point COC, ℃ 
 160 

 Viscosity mm2 / s @ 40 ℃ 
 12.1 

 Fat mass percentage of oil content in% 
 5 

 Carbon content, mass percent% 
 1.9 

 Chlorine content in mass percent% 
 1.6 







 The ★ extend tool life 

 The special active sulfur extreme pressure (EP) additives, high temperature under high pressure in the blade and at the interface of the object to react chemically to form a very effective boundary film to prevent metal to metal 

 Direct contact between the reduced tool wear. 

 ★ improve machining efficiency 

 Extreme Pressure (EP) fatty oil additives, the formation of protective film, from a compound to reduce the friction between the processing of metal and tool to reduce the heat, prevent sintering and chip curling and improve the machining accuracy and speed, Not only that, this product is light in color, high transparency, to more clearly see the tool and the workpiece. 

 ★ improve surface finish 

 Special active sulfur extreme pressure (EP) additives and fat oil additives, the perfect combination to enhance the wetting ability of this product and the oily, lubricating properties, improve the surface finish of the workpiece, only that this product has a good cooling characteristics, minimizes the modern high-speed machining prone years parts and knife cuttings overheating and the "Blue". 

 The ★ reduce maintenance costs 

 This product is an effective anti-zero-based additives, to reduce the concentration of the machine around the processing liquid droplet to make the workshop a safer, cleaner and save on the maintenance of the machine can be raised costs. Special oil 

 The formula makes this product has a strong rust and corrosion ability to prevent rust and corrosion of the workpiece, tool and machine. 

 Environment: Health and Safety 

 This product comes with a the Si Kalan Material Safety Data Sheets (MSDS) and Si Kalan user safety guidelines should be in accordance with the provisions of the steps and follow the relevant laws and regulations of use and sewage. 

 Shipping instructions 
 Shanghai area single orders over 2500 yuan more than can be delivered to your door. Cash on delivery. 

 Contact: Tang fruit Phone: 18221268629